Average cost of roof insulation – Forbes Advisor

0

Editorial Note: We earn a commission on partner links on Forbes Advisor. Commissions do not affect the opinions or ratings of our editors.

Insulating a roof, not to be confused with insulating an attic, is another way to prevent heat and cooling loss. Roof insulation is installed on the slope of the roof, above and below the rafters, while attic insulation is installed in the ceiling glass. Roof insulation is especially important if your home has a flat or pitched roof. Sealing a roof and adding insulation can protect it from ice dams and other moisture-related problems.

Compare quotes from the best insulation contractors

Free and non-binding estimates

Roof insulation costs

How much does roof insulation cost?

The cost of insulating a roof depends on the type of roof insulation you use, the R-value of the insulation, and the square footage you intend to cover. There are generally five types of insulation used for roofs.

Spray foam insulation generally requires a contractor to install and radiant barriers generally provide no R-value, although some companies claim that a radiant wall barrier will help trap heat in the home and create a barrier. -steam.

Is it worth insulating a roof?

The insulation of a roof is important under certain conditions. If the ceiling of a house is part of the roof deck, such as a cathedral ceiling, it is important to insulate the roof deck.

Insulating a roof can help prevent ice dams, where ice forms when water refreezes on a roof after a thaw. Ice dams can accumulate tremendous weight and put too much pressure on the roof to the point where the roof collapses.

An insulated roof also helps slab-on-grade homes in warmer climates stay cooler since air conditioning ducts are usually located in the attic of the home.

Converting an attic into living space

If you’re planning to finish an attic and turn it into a living space, you’ll need to install roof insulation to handle the temperature swings that an attic typically experiences.

What is the R-value?

The R-value is a number associated with the level of protection the insulation will give you. The higher the R-value, the better the protection. R-values ​​are important to note when looking for insulation because different climate zones have different R-value suggestions for insulation. Also, the higher the R-value, the higher the cost.

Compare quotes from the best insulation contractors

Free and non-binding estimates

Pitched Roof Insulation Costs

Insulating the sloped sides of a pitched roof can help retain heat if the space is used for other purposes than storage. The costs are the same as with other insulation materials – between $0.50 to $1.50 per square foot and with an installation around $2 to $2.50 per square foot.

Flat roof insulation costs

The average cost of installing insulation on a flat roof is approximately $0.67 per square foot, using 1-inch-thick PolyISO with an R-value of six. Expect to pay about a quarter of the price to install a flat roof when considering insulation. Keep in mind that the thicker the insulation board, the more expensive the project becomes.

Frequently Asked Questions (FAQ)

What is the difference between roof insulation and attic insulation?

Roof insulation is installed on the slope of the roof, above and below the rafters, while attic insulation is installed in the ceiling glass.

How much insulation do I need?

The US Department of Energy suggests a minimum of 11 inches of rockwool or fiberglass insulation or eight inches of cellulose.

Which is cheaper, attic insulation or roof insulation?

Attic insulation is considered easier and cheaper than roof insulation.

Share.

Comments are closed.